Critical review of the article “Effect of Low Hydroxyapatite Loading Fraction on the Mechanical and Tribological Characteristics of Poly (Methyl Methacrylate) Nanocomposites for Dentures”

Article Sidebar

PDF EPUB
Published: Aug 20, 2021
DOI: https://doi.org/10.22201/enesl.20078064e.2021.23.79515

Main Article Content

Virginia Campos Sanabria
Tecnológico Nacional de México en Celaya
http://orcid.org/0000-0002-3338-1976
Karla Judith Moreno Bello
Tecnológico Nacional de México en Celaya
http://orcid.org/0000-0003-1823-270X

Abstract

The study of new materials for biomedical application is still in the focus of scientific researchers because materials that satisfy completely biological needs have not been found yet. The recent investigation of Ahmed Fouly et al., (2021) addresses the analysis of a nanocomposite broadly employed as denture base material: the poly (methyl methacrylate) (PMMA) reinforced with Hydroxyapatite (HA). The relevance of the research lies in the need of enhancing the mechanical and tribological composite properties to decrease material failures, disturbing of patients, as well as cost and duration of treatments. In this scenario, the authors evaluated PMMA/HA nanocomposites with different low loading fractions of HA and related the effect of those concentrations on the change in the specified properties.

Downloads

Download data is not yet available.

Article Details

How to Cite
Campos Sanabria, V., & Moreno Bello, K. J. (2021). Critical review of the article “Effect of Low Hydroxyapatite Loading Fraction on the Mechanical and Tribological Characteristics of Poly (Methyl Methacrylate) Nanocomposites for Dentures”. Entreciencias: Diálogos En La Sociedad Del Conocimiento, 9(23). https://doi.org/10.22201/enesl.20078064e.2021.23.79515

Citas en Dimensions Service

Author Biographies

Virginia Campos Sanabria, Tecnológico Nacional de México en Celaya

Master of Science in Mechanical Engineering from the National Technological Institute of Mexico in Celaya. PhD student at the Engineering Sciences Program of the National Technological Institute of Mexico in Celaya. Research lines: Synthesis and Characterization of Biomaterials. 

Last Publications:

  • Campos-Sanabria, V., Hernández-Sierra, M.T., Bravo-Sánchez, M.G., Aguilera-Camacho, L.D., García-Miranda, J.S., y Moreno, K.J. (2018). Tribological and mechanical characterization of PMMA/HAp nanocomposites obtained by free-radical polymerization. MRS Advances, 3, 3763-3768. DOI: 10.1557/adv.2018.622
  • Campos-Sanabria, V., Aguilera-Camacho, L.D., Zavala-Bustos, J.A., García-Miranda, J.S., y Moreno-Bello, K.J. (2016, Septiembre). Estudio de fricción y desgaste de un acero AISI H13 recubierto con TiCN. Pistas Educativas, 38(118), 47-56. Recuperado de http://www.itc.mx/ojs/index.php/pistas/article/view/177

Karla Judith Moreno Bello, Tecnológico Nacional de México en Celaya

PhD in Science in Metallurgical and Ceramic Engineering from the Center for Research and Advanced Studies of the National Polytechnic Institute. Professor-Researcher at the National Technological Institute of Mexico in Celaya. Research lines: Synthesis and Characterization of Biomaterials, Biolubricants, Tribology. Member of the National System of Researchers, level I. 

Last Publications:

  • Falcón-Torres, P.D., Morales-Segoviano, A.G., Martínez-Salazar, A.A., Ortiz-Aldaco,M.G., Navarro, R., Marcos-Fernández, A., Ramírez-Hernández, A., Moreno, K. J., y Báez, J.E. (2021). Terpenes versus linear alkyl substituents: effect of the terminal groups on the oligomers derived from poly(ε-caprolactone). Chemical Papers. DOI: 10.1007/s11696-021-01727-3
  • Hernández-Sierra, M.T., Marta, J.E., Aguilera-Camacho, L.D., García-Miranda, J.S., Báez-García, J.E., y Moreno, K.J. (2020). Mechanical and bio-lubricated friction performance of PA6G for gear applications. MRS Advances, 5, 3055-3064. DOI: 10.1557/adv.2020.398
  • Hernández-Sierra, M.T., Bravo-Sánchez, M.G., Báez, J.E., Aguilera-Camacho, L.D., García-Miranda, J.S., y Moreno, K.J. (2019). Improvement Effect of Green Lubricants on the Tribological and Mechanical Performance of 4140 Steel. Applied Sciences, 9(22), 4896. DOI: 10.3390/app922489

Entreciencias: Diálogos en la Sociedad del Conocimiento recognizes and respects the moral rights of authors as well as ownership rights transferred in non-exclusivity to the journal for its open access dissemination and its preservation. Hence, authors who publish in this journal accept the following conditions:

  • Entreciencias: Diálogos en la Sociedad del Conocimiento from Universidad Nacional Autónoma de México is distributed under a Licencia Creative Commons Atribución-NoComercial-SinDerivar 4.0 Internacional, which allows the information and metadata to be used without commercial ends as long as proper citation is utilized.

  • Authors will have the right to non-exclusively distribute the contribution made to Entreciencias: Diálogos en la Sociedad del Conocimiento. That is, they will be able to include it in an institutional repository or disseminate it in other digital or printed media as long as it is explicitly stated that it was first published in Entreciencias: Diálogos en la Sociedad del Conocimiento. The following information must additionally be included: author, year, volume, page numbers, electronic paging, and DOI.

  • Authors, whose publications have been accepted, will have to send the Letter of Copyright Transfer in the corresponding format, filled out and signed by the author or authors.